Vandalproof - Weatherproof - Waterproof Dome Cameras
Guaranteed NOT to leak!
Guaranteed NOT to be stolen!
OR We'll Replace it FREE!
Guaranteed NOT to be stolen!
OR We'll Replace it FREE!
This amazing High-Tech, High-Resolution Camera has been designed to not only stop camera theft, but it’s Patent Pending Design assures that moisture is kept out of the main camera body – No matter how it is mounted or how the wires are routed.
"I have 4 camera systems total. Two from competitors, and two from Car Wash Cameras. The ones from Car Wash Cameras are the only ones that work. I even got footage from one of the auto bay cameras to deny a claim and the customer's insurance had to pay me $7000.00 for damages."
Andy Copeland
Checkered Flag Car Wash
Andy Copeland
Checkered Flag Car Wash
The BayProof camera has security screws that protect against theft and require a special tool that cannot be purchased at any hardware store.
PLUS – there is a trick to knowing which screws are the correct ones to remove and which ones are designed to hinder a thief. (we’ll tell you the secret when you purchase your cameras).
PLUS – there is a trick to knowing which screws are the correct ones to remove and which ones are designed to hinder a thief. (we’ll tell you the secret when you purchase your cameras).
We have now added a Patented 3-Axis Floating Camera Positioning and Aiming System inside the Dome. This allows the camera to be oriented in any direction and tilt angle so that no matter how you mount the camera, you can easily configure the picture to be upright and level.
2.8-11mm Varifocal Lens
12V DC
2.8-11mm Varifocal Lens
For areas not
perfectly lit at night
12V DC
2.8-11mm Varifocal Lens
For areas that are poorly
lit at night. Sees better in dark
conditions than any other
non-infrared camera.
(using Sony's EX-View Technology)
12V DC or 24V AC
2.8-11mm Varifocal Lens
For areas that have direct
sunlight or high glare from surfaces or water. Handles
any strong reflections that blind other camera types.
(using Sony's Wide Dynamic
Range tecnology.)
12V DC or 24V AC
Multiple Ways to securely mount this camera & protect the wiring
1. Mount to brick or block using masonry anchors and screws
2. Mount to structural steel using the supplied self-drilling
metal screws
2. Mount to structural steel using the supplied self-drilling
metal screws
Protect the Wiring by one of these methods
1. No Conduit – run the wires directly into the wall.
(Use RTV sealant around conduit opening)
2. Using LiquidTight conduit fittings and tubing.
3.Regular metal conduit – 2 pre-threaded conduit access holes provided – ¾” on the side, or ½” on the bottom.
(Use RTV sealant around conduit opening)
2. Using LiquidTight conduit fittings and tubing.
3.Regular metal conduit – 2 pre-threaded conduit access holes provided – ¾” on the side, or ½” on the bottom.
ADD a Wall Mount Base
Conduit Base included with wall mount purchase.
Either run the wiring thru the arm into the wall – OR – add the conduit base.
When you order the New Wall Mount Option it comes with every mounting option you see here (regular ceiling base, wall mount arm base and additional conduit base that attaches to the Wall mount Arm).
Either run the wiring thru the arm into the wall – OR – add the conduit base.
When you order the New Wall Mount Option it comes with every mounting option you see here (regular ceiling base, wall mount arm base and additional conduit base that attaches to the Wall mount Arm).
Attach Camera to Base
All screws are equipped with O-rings and Camera is totally isolated from the mounting base and wiring – NO Water Incursion!
* Camera Replacement Guarantee: Camera, Base and Conduit must be installed securely and correctly as per instructions. Send a picture of the installed camera base to register for Replacement Program. Then, if camera is stolen, send a short clip of the camera theft (since they cannot cut the cable there will be some footage of the thieves trying to steal the camera), AND/OR police report. Theft must occur during the Two-Year Warranty Period to qualify for replacement.
